Manual

40 GEO3.5 MANUAL
TRAINING PARAMETER
In training mode the GEO3.5 simulates the ring cycle so that the user may practice pulling the trigger without wasting air and
making lots of noise. The BBSS is overridden in order to simulate paintballs entering the breech and the beeper indicates when
a shot is red. Training mode is indicated with a ‘T’ in the BBSS indicator.
> OFF: Training mode is disabled and the GEO3.5 functions normally.
> ON: Training mode is enabled.
> CANCEL: Cancel editing and leave the parameter unchanged.
SHOT COUNT MENU
This menu is comprised of parameters that control the shot counter.
GAUGE PARAMETER
This parameter allows the user to toggle the gauge graphic on and off in the shot counter Run Screen. The choices for the
GAUGE parameter are:
> OFF: Gauge graphic on the shot counter run screen is disabled.
> ON: Gauge graphic on the shot counter run screen is enabled.
> CANCEL: Cancel editing and leave the parameter unchanged.
GAUGE MAX PARAMETER
The gauge max parameter allows the user to set the number the gauge counts down from every time the GEO3.5 is red.
The user can set the gauge from 100 to 2000 in increments of 10.