Manual
34 GEO3.5 MANUAL
FILTER MENU
The parameters on the Filter menu are all used to tune the GEO3.5’s software lters which prevent the GEO3.5 from ring
unless all of the necessary conditions are met. The factory default settings will be suitable for most set-ups, however certain
loader and trigger set-ups may require modication of one or more of these parameters.
DEBOUNCE PARAMETER
The DEBOUNCE parameter is used to combat any trigger bounce that might occur in the GEO3.5 and can be set between
level 1 and level 9 in one level increments.
> LEVEL 9: Level 9 providing the most ltering (least ‘bouncy’).
> LEVEL 1: Level 1 providing the least ltering (most ‘bouncy’).
> CANCEL: Cancel editing and leave the parameter unchanged.
EMPTY PARAMETER
In order for the BBSS to function correctly it must rst detect that the bolt is fully retracted and the breech is empty, and then
detect that a paintball is loaded into the breech before the GEO3.5 is allowed to re. The parameter can be set between 1.0
and 20.0ms in 0.1ms increments.
FULL PARAMETER
Tumbling paintballs can take time to settle in the breech before they can be successfully red. This parameter is used to set
the amount of time that a paintball has to be in the breech before the GEO3.5 is allowed to re. This parameter can be set
between 1.0 and 20 milliseconds in 0.1ms increments.