Manual

GEO3.5 MANUAL 29
PRE-SET MENU
In order to simplify the set up of the GEO3.5 a number of pre-set congurations are available for selection. Choosing one of
these pre-sets will cause all of the necessary parameters to be set in such a way as to make the GEO3.5 comply with the rules
governing a particular paintball league1. It is also possible for the user to save up to two pre-set congurations of their own.
LOAD PARAMETER
This parameter is used to load the required pre-set conguration and has the following choices:
> USER 1: Load a set of custom ring mode parameters that have been previously saved by the user.
> USER 2: Load a set of custom ring mode parameters that have been previously saved by the user.
> FACTORY: Reset every parameter to the factory set default. The GEO3.5 leaves the factory set in this way.
> NPPL: Load a set of parameters that congures the GEO3.5 to comply with the NPPL rules governing ring modes.
1,2
> PSP 10: Load a set of parameters that congures the GEO3.5 to comply with the PSP rules governing ring modes
in lower divisions (10bps).
1,2
> PSP 12: Load a set of parameters that congures the GEO3.5 to comply with the PSP rules governing ring modes
in higher divisions (12bps).
1,2
> MS10: Load a set of parameters that congures the GEO3.5 to comply with the 2010 Millennium Series rules
governing ring modes.
1,2
> CANCEL: Editing is cancelled and the parameter remains unchanged.
SAVE PARAMETER
This parameter is used to save the current set of parameters as a user dened custom pre-set conguration.
This parameter has the following choices:
> USER 1: Save the current parameters as the pre-set ‘USER 1’.
> USER 2: Save the current parameters as the pre-set ‘USER 2’.
> CANCEL: Editing is cancelled and the parameter remains unchanged.
1 Some pre-sets and re modes may only be available in certain countries and on some models of the GEO3.5.
2 All pre-sets are correct at time of printing. It is the users responsibility to ensure that the loaded pre-set complies with the event
rules the marker is intended to be used in.