Manual

GEO3.5 MANUAL 27
WARNING!
The marker can be red while navigating all menus and parameters.
Paintball industry standard eye/face/ear and head protection designed
specically to stop paintballs and meeting ASTM standard F1776 (USA)
or CE standard (Europe) must be worn by the user and any person within
range during use, assembly, cleaning and maintenance at all times.
WARNING
ACCESSING THE MENU SYSTEM
To access the Main menu from the run screen double-click the button and the rst item on the Main
menu will be displayed. Alternatively, push and hold the button for 2 seconds.
Some of the parameters in the menu system can have a tournament lock applied to them. This lock can
be toggled on and off by pressing the tournament lock button on the circuit board (see
A
in gure 14A).
When trying to select a parameter that is locked, the a ‘LOCKED’ message will be briey displayed.
MOVING AROUND THE MENUS
Press and release the button to display the next item on the menu. When the
last menu item is displayed, pressing the button will display the rst item.
Press and release the button to display the previous item on the menu. When
the rst menu item is displayed, pressing the button will display the last item.
ALTERING PARAMETERS
When the displayed item is a parameter, as indicated by a
parameter value on the right of the screen, pressing the button
will activate the EDIT mode which allows the parameter value to
be altered. When EDIT mode is active, the black box surrounding
the parameter name disappears. There are two types of
parameter, numeric parameters and choice parameters.
A numeric parameter has a numeric value whereas a choice
parameter is one that has a small number of distinct choices.
Altering parameter values is essentially the same for both types
of parameter. To alter a numeric parameter, rst activate the
EDIT mode. Press the button to increase the parameter value
one step at a time. Press and hold the button to increase the
parameter value rapidly. When the value reaches it’s maximum it
will revert to its minimum value. Press the button to decrease
the parameter value one step at a time.
Press and hold the button to decrease the parameter value
rapidly. When the value reaches its minimum it will revert to it’s
maximum value. When the required parameter value is displayed
press the button to accept the value and end the EDIT mode.
To alter a choice parameter, rst activate the EDIT mode. Press
the button to display the next choice in the list. When the last
choice is displayed, pressing will display the rst choice in
the list. Press the button to display the previous choice in the
list. When the rst choice is displayed, pressing the button will
display the last choice in the list. When the required choice is
displayed press the button to accept the choice and end the
EDIT mode. If the displayed choice is cancel then pressing the
button will end the EDIT mode and restore the parameter to the
value that is was prior to editing.
FIG 14A
A