Manual

GEO3.5 MANUAL 25
THE LOCK INDICATOR
The GEO3.5 has a Tournament Lock which prevents the user from making
changes to any parameter that affects the way in which the GEO3.5 shoots,
without the need for tools.
When the lock is enabled the lock indicator will show a closed padlock .
This feature is necessary in order to make the GEO3.5 legal for tournament play.
To enable or disable the tournament lock see Accessing the Menu System on
page 27.
When the lock is disabled the lock indicator will show an open padlock .
THE BATTERY LEVEL INDICATOR
The battery level indicator is used to show the state of the battery within the
GEO3.5. When the battery is fresh the indicator will show a ‘full’ battery and as
the battery is drained, so will the indicator show the battery emptying. When the
battery reaches a point at which the GEO3.5 will no longer function reliably, the
indicator will start to ash. At this point the battery must be changed immediately.
As well as displaying the voltage level of the battery, the indicator also warns
if the battery being used has an incorrect voltage to operate the electronics
reliably. The icon for a battery with an incorrect voltage output is . If this icon is
shown the battery must be replaced immediately.
THE GAME TIMER
When the game timer is shown on the run screen then it can
be started by pressing the button and the timer will start to
count down. The game timer can also be congured to start on
a trigger press with the start parameter (see page 41).
When the game timer reaches the alarm time the game
timer will start to ash and the audible alarm will sound every
second, provided that the sound parameter is on.
When the game timer reaches 00:00, GAME OVER will be
displayed and the audible alarm will sound continually,
provided that the sound parameter is set to ‘on’.
To stop the game timer at any time press and hold the
button for 0.5 seconds.
To reset the game timer to it’s pre-set start time, push and hold
the button for 0.5 second. The game timer will also be reset
whenever the GEO3.5 is switched off.
THE SHOT COUNTER
The shot counter will increment every time that the circuit board
registers a trigger pull, regardless of whether the shot counter
is displayed or not. When the shot counter is displayed on the
run screen it can be reset to 0 by pressing and holding the
button for 0.5 seconds.
There is also an optional shot gauge that can be displayed on
this run screen.
The gauge counts down from a user adjustable number.
To alter the gauge settings see page 40. The gauge is reset
whenever the GEO3.5 is switched off or the button is
pressed.
The shot counter does not function when the GEO3.5 is in
Training Mode (see page 40).