Manual

ECLiPSE E-PORTAL
TheGEO3.1iscompatiblewithEclipseE-PortalSoftware.This
softwareisanupgradetotheGEO3.1platform.TheEclipseE-Portal
Software,USBcableandUSBdaughterboardaresoldasakit,
separatefromtheGEO3.1.
1
E-PortalallowsyoutoconnecttheEclipseGEO3.1toaPC,wherea
numberofoperationscanbeperformed:
2
Updatethemarkerfirmware-fromtimetotimenewfirmwaremaybe
releasedbyPlanetEclipse.Youcannowinstallthelatestfirmware
usingtheEclipseE-Portal.
Altertheelectronicparameters-theEclipseE-Portalwillgiveyoufull
accesstoalloftheparametersontheGEO3.1circuitboard.
Customisescreengraphics-customisethebootupscreengraphic.







1
If you already own an Eclipse E-portal kit (such as the kit included with the Eclipse SLS or CSL
Ego), this kit will be compatible with the GEO3.1.
2
Minimum system requirements :
Monitor Resolution - 1024x768 or higher, CD-ROM drive,Keyboard, Mouse, USB socket, 5MB
of hard disk space, 1GHz Processor, 384Mb RAM, Microsoft® Windows® XP / Windows Vista /
Windows 7 / Windows 8, internet connection (required for software and firmware updates).
DE-GAS YOUR MARKER, DISCHARGING ANY STORED
GAS IN A SAFE DIRECTION, AND REMOVE THE
BARREL, LOADER, AIR SYSTEM AND ANY PAINTBALLS
TO MAKE THE MARKER EASIER AND SAFER TO WORK
ON.
PC
USB
GEO3.1
and other Eclipse
E-Portal compatible
markers
WARNING
ECLiPSE E-PORTAL 83