Manual

Thisparameterisusedtosavethecurrentsetofparametersasauserdefinedcustompresetconfiguration.
Thisparameterhasthefollowingchoices:

>USER1:Savethecurrentparametersasthepreset‘USER1’.
>USER2:Savethecurrentparametersasthepreset‘USER2’.
>CANCEL:Editingiscancelledandtheparameterremainsunchanged.
Thisparameterisusedtoloadtherequiredpresetconfigurationandhasthefollowingchoices:
>USER1:Loadasetofcustomfiringmodeparametersthathavebeenpreviouslysavedbytheuser.

>USER2:Loadasetofcustomfiringmodeparametersthathavebeenpreviouslysavedbytheuser.
>FACTORY:Reseteveryparametertothefactorysetdefault.TheGEO3.1leavesthefactorysetinthisway.
>NPPL:LoadasetofparametersthatconfigurestheGEO3.1tocomplywiththeNPPLrulesgoverningfiringmodes.
1,2
>PSP10:LoadasetofparametersthatconfigurestheGEO3.1tocomplywiththePSPrulesgoverningfiringmodesinlowerdivisions(10bps).
1,2

>PSP12:LoadasetofparametersthatconfigurestheGEO3.1tocomplywiththePSPrulesgoverningfiringmodesinhigherdivisions(12bps). 1,2 
>MS10:LoadasetofparametersthatconfigurestheGEO3.1tocomplywiththe2010MillenniumSeriesrulesgoverningfiringmodes.
1,2

>Cancel:Editingiscancelledandtheparameterremainsunchanged.
InordertosimplifythesetupoftheGEO3.1anumberofpresetconfigurationsareavailableforselection.Choosingoneofthese
presetswillcauseallofthenecessaryparameterstobesetinsuchawayastomaketheGEO3.1complywiththerulesgoverning
aparticularpaintballleague1.Itisalsopossiblefortheusertosaveuptotwopresetconfigurationsoftheirown.
1
Some presets and fire modes may only be available in certain countries and on some models of the GEO3.1.
2
All presets are correct at time of printing. It is the users responsibility to ensure that the loaded preset complies with the event rules the marker is intended to be used in.
PRESET MENU
LOAD PARAMETER
SAVE PARAMETER
ADVANCED SETUP 29