Manual

WARNING: DO NOT REMOVE THE INLINE PURGE CONTROL VALVE.
THE PURGE CONTROL VALVE DOES NOT NEED TO BE REMOVED DURING
REGULAR MAINTENANCE.
FAILURE TO COMPLy WITH THIS WARNING MAy CAUSE THE MARkER TO FIRE
A SHOT THAT COULD RESULT IN SERIOUS INJURY OR DEATH.
SL3 INLINE REGULATOR
1
The Inline Regulator mounting threads on the Geo2
and SL3 are NOT compatible with older style regulator
threads (Ego 10 and older).
2
ONLY use the SL3 Geo2 Spring with the GEO2.
3
If the Purge Poppet Assembly is removed for
maintenance ensure is it re-installed correctly, failure to
do so may seriously damage the Geo2 solenoid.
ADJUSTER SCREW
#011 NBR 70
PURGE POPPET ASSEMBLY
3
REGULATOR SEAL
ADJUSTER TOP
MACROLINE FITTING
PURGE CONTROL VALVE
INLINE REGULATOR
SPRING
2
INLINE REGULATOR
PISTON
#016 NBR70
INLINE REGULATOR
BOTTOM
#011 NBR70
INLINE REGULATOR
SWIVEL
INLINE REGULATOR
TOP
1
#008 NBR70
#016 NBR70
8.
ORIENTATION