Manual

SEMI SHOTS
THE SEMI SHOTS MENU
The parameter sets the number of shots
in semi-automatic that are required at the
KICK IN rate before ramping will start. The
parameter can be set between 3 and 9 pulls
in 1 pull increments.
KICK IN
THE KICKIN PARAMETER
This parameter sets the minimum rate
at which the user has to pull the trigger
in order to start ramping. This parameter
can be set between 3.3 and 10.0 pulls per
second in 0.1 pulls per second increments.
SUSTAIN
THE SUSTAIN RATE PARAMETER
Once the Geo2 is ramping the user has to
continue to pull the trigger at a minimum
rate in order to maintain the ramping.
This parameter sets this rate and can be
between 3.3 and 10.0 pulls per second in
0.1 pulls per second increments.
RESTART
THE RAMP RESTART PARAMETER
The RESTART parameter denes the amount
of time after the last trigger pull during
which the ramp can be restarted with a
single trigger pull. If a trigger pull occurs
after the RESTART time has expired, then the
other ramp start conditions have to be met
before ramping will restart. This parameter
can be set between 0.0 and 1.0 seconds in
0.1 second increments.
TIMING
THE TIMING MENU
The parameters on the TIMING menu all relate to the
control of the solenoid valve (see overleaf).
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR GEO2
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTRES
PARTS LIST
SPARES & ACCESSORIES
E-PORTAL
INDEX
37.
ADVANCED SET-UP
ADVANCED SET-UP
QUICK GUIDE