Manual

PRESET
THE PRESET MENU
In order to simplify the set up of the Geo2 a number of
preset congurations are available for selection. Choosing
one of these presets will cause all of the necessary
parameters to be set in such a way as to make the Geo2
comply with the rules governing a particular paintball
league
1
. It is also possible for the user to save up to two
preset congurations of their own.
LOAD
THE LOAD PRESET PARAMETER
This parameter is used to load the required
preset conguration and has the following
choices:
> USER 1: Load a set of custom ring mode
parameters that have been previously saved
by the user.
> USER 2: Load a set of custom ring mode
parameters that have been previously saved
by the user.
> FACTORY: Reset every parameter to the factory set
default. The Geo2 leaves the factory set in this way.
> NPPL: Load a set of parameters that congures the
Geo2 to comply with the 2008 NPPL rules governing ring
modes.
1,2
> PSP 10: Load a set of parameters that congures the
Geo2 to comply with the PSP rules governing ring modes
in lower divisions (10bps).
1,2
> PSP 12: Load a set of parameters that congures the
Geo2 to comply with the PSP rules governing ring modes
in higher divisions (12bps).
1,2
> MS10: Load a set of parameters that congures the Geo2
to comply with the 2010 Millennium Series rules governing
ring modes.
1,2
> CANCEL: Editing is cancelled and the parameter remains
unchanged.
SAVE
THE SAVE PRESET PARAMETER
This parameter is used to save the current
set of parameters as a user dened custom
preset conguration.
This parameter has the following choices:
> USER 1: Save the current parameters as
the preset ‘USER 1’.
> USER 2: Save the current parameters as the preset ‘USER
2
’.
> CANCEL: Editing is cancelled and the parameter remains
unchanged.
1
Some presets and re modes may only be available in certain
countries and on some models of the Geo2.
2
All presets are correct at time of printing. It is the users
responsibility to ensure that the loaded preset complies with the
event rules the marker is intended to be used in.
34.
ADVANCED SET-UP