Manual

ACCESSING THE MENU
SYSTEM
To access the Main menu from the run screen double-click
the button and the rst item on the Main menu will be
displayed. Alternatively, push and hold the button for
2 seconds.
Some of the parameters in the menu system can have a
tournament lock applied to them. This lock can be toggled
on and o by pressing to tournament lock button on the
circuit board ( see A in g 8.1).
If you try to select a parameter that is locked, the locked
display will show on the screen.
MOVING AROUND THE
MENUS
Press and release the button to display the next item on
the menu. When the last menu item is displayed, pressing
the button will display the rst item.
Press and release the button to display the previous
item on the menu. When the rst menu item is displayed,
pressing the button will display the last item.
When the displayed item is a branch, as indicated by an
animation on the right of the screen, press the button
to move to another menu.
ALTERING PARAMETERS
When the displayed item is a parameter, as
indicated by a parameter value on the right
of the screen, pressing the button will
activate the
EDIT mode which allows the
parameter value to be altered. When EDIT
mode is active, the black box surrounding
the text disappears. There are two types of
parameter, numeric parameters and choice
parameters.
A numeric parameter has a numeric value
whereas a choice parameter is one that has
a small number of distinct choices. Altering
parameter values is essentially the same for both types of
parameter.
To alter a numeric parameter, rst activate the EDIT mode.
Press the button to increase the parameter value one
step at a time. Press and hold the button to increase
the parameter value rapidly. When the value reaches it’s
maximum it will revert to it’s minimum value. Press the
button to decrease the parameter value one step at a time.
Press and hold the button to decrease the parameter
value rapidly. When the value reaches it’s minimum it will
revert to it’s maximum value. When the required parameter
value is displayed press the button to accept the value
and end the EDIT mode.
To alter a choice parameter, rst activate the EDIT mode.
Press the button to display the next choice in the list.
When the last choice is displayed, pressing will display
the rst choice in the list. Press the button to display
the previous choice in the list. When the rst choice is
displayed, pressing the button will display the last
choice in the list. When the required choice is displayed
press the button to accept the choice and end the EDIT
mode. If the displayed choice is cancel then pressing the
button will end the EDIT mode and restore the parameter
to the value that is was prior to editing.
WARNING: THE MARKER CAN BE FIRED WHILE
NAVIGATING ALL MENUS AND PARAMETERS.
A
FIG 8.1
32.
ADVANCED SET-UP