Manual

THE ETHA LT BARREL
D
The Eclipse Etha comes as standard with single piece
barrel
.
*
The
barrel
screws into the front of the Etha using a
right hand thread
meaning
that if you hold the Etha pointing away from you the
barrel
screws into the
body
in a
counter-clockwise direction.
*
On the
barrel back
there is a 016 NBR 70 o-ring
A
which prevents the
barrel
from
vibrating loose from the
Etha body
when the marker is fired. Replace and lubricate the
o-ring with Eclipse Grease as necessary.
*
The bore size of your barrel may vary according to the
model of Etha that you have. The Etha will only accept
COCKER threaded barrels. Do not use any other type
of barrel thread.
A
13
QUICK GUIDE
CONTENTS
INTRODUCTION
QUICK SET-UP
ORIENTATION
USING THE ETHA
USER INTERFACE
MAINTENENANCE
FAULT FINDING
PARTS LIST
SERVICE & SPARES
INDEX
ORIENTATION
Etha-Manual-v2.indd 13 13/02/2017 13:10