Manual

ETEK5 MANUAL 55
MAINTENANCE
CONTINUED
Ensure the LPR assembly is still correctly in place in the body (see gure 30M).
Make sure the exhaust hole in the valve guide is pointed directly upwards and
the lip on the valve plug is pointed downwards (see gure 30N). Then slide the
entire valve guide, exhaust valve, valve stem and valve plug into the body.
Ensure the valve guide is fully inserted into the ETEK5 body.
Push and hold the valve plug rmly up to the ETEK5 body (see gure 30O), take
the tuning fork and insert it into the FRM positioning the forks either side the LPR
body. Push the fork up into the body until the tips of the fork stop against the
inside of the body and the base of the tuning fork is ush with the threads on the
FRM (see gure 30P).
You have now successfully stripped and cleaned your ETEK5 valve assembly.
See page 40 on how to attach the SL4 inline regulator.
WARNING!
If you are unsure about performing a maintenance procedure please
contact your nearest service centre.
WARNING
FIG 30M
FIG 30N
FIG 30O
FIG 30P