Manual

FILTER
THE FILTER MENU
The parameters on the Filter Menu are all used to tune
the Etek4’s software filters which prevent the Etek4
from firing unless all of the necessary conditions are
met. The factory default settings will be suitable for
most set-ups, however certain loader and trigger set-
ups may require modification
of one or more of these parameters:
DBOUNCE
THE DEBOUNCE PARAMETER
The Dbounce parameter is used to combat
any trigger bounce that might occur in the
Etek4 and can be set between level 1 and
level 9 in one level increments.
> LEVEL 9: Level 9 providing the most
filtering.
LEVEL 8 - LEVEL 2
> LEVEL1: Level 1 providing the least
filtering.
> CANCEL: Cancel editing and leave the
parameter unchanged.
EMPTY
THE EMPTY BREECH TIME PARAMETER
In order for the BBSS to function correctly it
must first detect that the bolt is fully retracted
and the breech is empty, and then detect that
a paintball is loaded into the breech before the
Etek4 is allowed to fire. Slots or holes in some
third party bolts can fool the BBSS and so this
parameter is used to specify a minimum time
that the breech must be empty. The parameter
can be set between 1.0 and 20.0ms in 0.5ms
increments.
FULL
THE FULL PARAMETER
Tumbling paintballs can take time to
settle in the breech before they can be
successfully fired. This parameter is used
to set the amount of time that a paintball
has to be in the breech before the Etek4 is
allowed to fire. This parameter can be set
between 1.0 and 20 milliseconds in 0.5ms
increments.
PULL TM
THE PULL TIME PARAMETER
The PULL TM parameter is used to set the
minimum amount of time that the trigger
must be pulled before it is recognised as
a valid trigger pull. This parameter can be
set between 3.0 and 25.0 milliseconds in
0.5 ms increments.
REL TM
THE RELEASE TIME PARAMETER
The REL TM parameter is used to set the
minimum amount of time that the trigger
must be released before it is recognised as
a valid trigger release. This parameter can
be set between 3.0 and 25.0 milliseconds
in 0.5 ms increments.
CONTENTS
ORIENTATION
QUICK SET-UP
USING THE ETEK4
ADVANCED SET-UP
EMORTAL BOARD
MAINTENANCE
UPGRADING
FAULT FINDING
SERVICE CENTRES
PARTS LIST
SPARES
INDEX
53.
EMORTAL BOARD
QUICK GUIDE