Manual
ACCESSING THE MENU
SYSTEM
To access the Main Menu from the Run Screen push
and hold the
button for 2 seconds.
To access the Set-up Menu from either the Run Screen
or the Main Menu push the internal Setup button and
the first item on the Set-up Menu will be displayed.
1
MOVING AROUND THE
MENUS
Press and release the button to display the next
item on the menu. When the last menu item is
displayed, pressing the
button will display the first
item.
Press and release the
button to display the
previous item on the menu. When the first menu item
is displayed, pressing the
button will display the
last item.
When the displayed item is a branch, as indicated by
an animation on the right of the screen, press the
button to move to another menu.
ALTERING PARAMETERS
When the displayed item is a parameter, as indicated
by a parameter value on the right of the screen,
pressing the
button will activate the EDIT mode
which allows the parameter value to be
altered. When EDIT mode is active, edit
indicators appear on the left of the screen
as shown.
There are two types of parameter, numeric
parameters and choice parameters.
A numeric parameter has a value which is a number
whereas a choice parameter is one that has a small
number of distinct choices. Altering parameter values
is essentially the same for both types of parameter.
To alter a numeric parameter, first activate the EDIT
mode. Press the
button to increase the parameter
value one step at a time. Press and hold the
button to increase the parameter value rapidly. When
the value reaches it’s maximum it will revert to it’s
minimum value. Press the
button to decrease the
parameter value one step at a time. Press and hold
the
button to decrease the parameter value rapidly.
When the value reaches it’s minimum it will revert to
it’s maximum value. When the required parameter
value it displayed press the
button to accept the
value and end the EDIT mode.
To alter a choice parameter, first activate the EDIT
mode. Press the
button to display the next choice
in the list. When the last choice is displayed, pressing
will display the first choice in the list. Press the
button to display the previous choice in the list.
When the first choice is displayed, pressing the
button will display the last choice in the list. When
the required choice is displayed press the
button
to accept the choice and end the EDIT mode. If the
displayed choice is Cancel then pressing the
button
will end the EDIT mode and restore the parameter to
the value that is was prior to editing.
1
If the tournament lock is set to ‘off’ then the Main Menu and Set-up
Menu are joined together which means that they can be accessed
in either of the two ways above.
EDIT INDICATORS
44.
EmORTAL bOARD