Manual

THE ACTUAL RATE
OF FIRE
When the ACTUAL ROF is selected
for display the Run Screen will look
something like the screen to the right.
The value displayed in the top left of
the screen represents the number
of full cycles completed in the last
second - the actual rate of fire over
the second. The number below it
is the maximum actual rate of fire
that has been recorded. To reset this
maximum, press and hold the
button for 0.5 seconds.
THE PEAK RATE OF
FIRE
When the Peak ROF is selected for
display the Run Screen will look
something like the screen to the left,
which differs from the display of the
Actual ROF by the inclusion of the
indicator ‘PK’. The value displayed in
the top left of the screen represents
the rate of fire measured between the
last two shots. The number below it is
the maximum peak rate of fire that has
been recorded. To reset this maximum,
press and hold the
button for 0.5
seconds.
The Peak ROF is typically higher than
the Actual ROF as it is much easier to fire two shots in
quick succession than it is to maintain a string over a
longer period of time.
THE MENU SYSTEM
Behind the Run Screen is a structured menu system
comprised of multiple levels of menus. Each menu
contains a number of menu items and each menu
item can either be an editable parameter or a branch
to another menu. Branches always have an animated
graphic whereas parameters indicate their current
value.
The menus are ‘smart menus’ in that they will expand
and contract depending upon the state of certain
parameters. For example, the MAX ROF parameter
is only visible when the ROF CAP parameter is set to
‘on’. Smart menu items are indicated with a * in the
tables on pages 40-43.
The menu structure is shown in the following pages.
TYPICAL
BRANCH
TYPICAL
PARAMETER
CONTENTS
ORIENTATION
QUICK SET-UP
USING THE ETEK4
ADVANCED SET-UP
EMORTAL BOARD
MAINTENANCE
UPGRADING
FAULT FINDING
SERVICE CENTRES
PARTS LIST
SPARES
INDEX
39.
EMORTAL BOARD
QUICK GUIDE