Manual

USER INTERFACE
The Etek4 has a simple user interface through which
all aspects of it’s electronic control system can
be monitored and adjusted by means of the three
buttons and graphical LCD which comprise the
navigation console.
SWITCHING ON
The Etek4 is be switched on by pushing and
holding the
button. The LCD will display startup
information including model number and software
version before displaying the Run Screen if the
button continues to be held down during startup.
RUN SCREEN LAYOUT
The root of the user interface is the Run Screen. This
screen is the one most often displayed and provides
the user with essential feedback on the state of the
Etek4. A typical Run Screen is shown on the right.
On the left of the screen is a display option that is
user selectable from the Main Menu (see page 45).
This option can be:-
> A GAME TIMER
> A SHOT COUNTER
> AN ACTUAL RATE OF FIRE
INDICATOR
> A PEAK RATE OF FIRE
INDICATOR
Briefly pressing the
button will replace the display
option with the name of the currently selected Preset
(see page 47), or CUSTOM if a parameter of the
selected preset mode has been edited.
On the right of the screen are up to five icons, each of
which provides graphical indication on different parts
of the Etek4 control electronics.
BREAK BEAM SENSOR SYSTEM
INDICATOR
USER SELECTABLE DISPLAY
OPTION
LOCK INDICATOR
BATTERY LEVEL INDICATOR
TRIGGER DETECTION
INDICATOR
36.
EmORTAL bOARD