Manual

CONTINUED
Using Eclipse Gun Oil lubricate the LPR body o-rings SEE
FIGURE 21.13.
Take the exhaust valve and insert the white end into the
valve spring, and the other end of the valve spring into
the back of the LPR body (creating a stack of parts) SEE
FIGURE 21.14.
Take the stack and insert it into the valve chamber bore of
the Etek3 body, exhaust valve rst SEE FIGURE 21.15.
When inserted, line up the holes in the LPR body with the
FRM screw hole in the Etek3 body SEE FIGURE 21.16.
Insert and tighten down the FRM screw using a 1/8” hex
key SEE FIGURE 21.17.
Attach the Etek3 frame (See page 62).
You have now stripped and cleaned your Etek3 Exhaust
Valve Assembly.
FIG 21.12 FIG 21.13
FIG 21.14
FIG 21.15
FIG 21.16 FIG 21.17
WARNING: IF YOU ARE AT ALL UNSURE OF PERFORMING
THE MAINTENANCE PROCEDURE PLEASE CONTACT
YOUR NEAREST ECLIPSE SERVICE CENTRE. SEE PAGES
8081
WARNING
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR ETEK3
ADVANCED SET-UP
EMORTAL BOARD
MAINTENANCE
UPGRADING
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
INDEX
69.
MAINTENANCE
MAINTENANCE
QUICK GUIDE