Manual

TIMING
THE TIMING MENU
The parameters on the Timing Menu all relate to the timing
of specic events.
DWELL
THE DWELL PARAMETER
The DWELL parameter sets the amount of time
that the solenoid is energized and therefore
the amount of air that is released with each
shot of the Etek3. Setting this parameter too
low will result in low velocity shots and/or
excessive shot to shot velocity uctuations.
Setting the parameter too high will simply
waste gas and make the Etek3 louder.
The DWELL can be set between 0.0 and 15.0
milliseconds. The factory default setting can
normally be reduced after a few thousand shots as the
Etek3 ‘beds-in’.
FSD COMP
THE FIRST SHOT DROPOFF
COMPENSATION PARAMETER
First shot drop o is a reduction in velocity of
the rst shot red after an extended period
of not ring and is caused by the stiction
between dynamic o-rings and the surfaces
that they are in contact with. In order to
compensate for FSD this parameter can be
set to add extra time to the DWELL parameter
for the rst shot. This parameter can be set
between 0.0 and 5.0 milliseconds.
FSD DLY
THE FIRST SHOT DROP OFF DELAY
PARAMETER
This parameter sets the amount of time after
the last shot before the FSD COMP is used on
the next shot. The rst shot after powering
on the Etek3 will always have FSD COMP. This
parameter can be set between 30 and 240
seconds in 10 second increments.
LIGHT
THE LIGHT PARAMETER
The LCD backlight is illuminated whenever
any of the buttons are pressed on the Etek3.
The LIGHT parameter is used to set the
amount of time that the backlight stays lit
between 0.0 and 20.0 seconds in 0.5 second
increments.
SLEEP
THE SLEEP PARAMETER
If the Etek3 is inactive for a period of time
then it will automatically switch o in order
to save power. The SLEEP parameter is used to
set that time between 5 and 60 minutes in 5
minute increments.
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR ETEK3
ADVANCED SET-UP
EMORTAL BOARD
MAINTENANCE
UPGRADING
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
INDEX
49.
EMORTAL BOARD
EMORTAL BOARD
QUICK GUIDE