Manual

SAVE
THE SAVE PRESET PARAMETER
This parameter is used to save the current
set of parameters as a user dened custom
Preset conguration. This parameter has the
following choices:-
> USER 1: Save the current parameters as the
preset ‘USER 1’.
> USER 2: Save the current parameters as the
preset ‘USER 2’.
> CANCEL: Editing is cancelled and the
parameter remains unchanged.
With the exception of
FACTORY each of the Presets
changes only those parameters that control the ring
mode of the Etek3, leaving FILTER and TIMING unchanged.
MODE
THE FIRING MODE PARAMETER
This parameter is used to select the ring
mode of the Etek3 and has the following
choices:
> SEMI: This is the default and in this ring
mode the Etek3 will re one shot for every
trigger pull.
> RAMP: In this ring mode, the rate of re is
increased above the rate at which the trigger
is pulled once certain criteria have been met.
These criteria are set by the parameters on the
Ramp Set Menu.
3
> CANCEL: Editing is cancelled and the parameter is
unchanged.
1
All presets are correct at time of printing. Please check with
the event organiser to make sure the above presets are still
considered legal.
2
The current preset conguration can be viewed from the run
screen by pressing the button.
3
Certain modes may only be available in certain countries and
on certain models of the Etek3.
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR ETEK3
ADVANCED SET-UP
EMORTAL BOARD
MAINTENANCE
UPGRADING
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
INDEX
45.
EMORTAL BOARD
EMORTAL BOARD
QUICK GUIDE