Manual
LOCK
THE TOURNAMENT LOCK PARAMETER
The Etek3 has a tournament lock which
prevents the user from making changes to any
parameter that aects the way in which the
Etek3 shoots without the use of tools.
This parameter is used to set the state of
the tournament lock and has the following
choices:-
> ON:
Turn on the tournament lock. The Set-
Up Menu is only accessible by removing the
right hand cheek of the rubber grips and then pressing and
holding the red SETUP button on the circuit board.
> OFF:
Turn o the tournament lock. The Set-Up Menu is
added to the Main Menu, making it easily accessible by
pressing and holding the button.
> CANCEL:
Cancel selection and leave the parameter
unchanged.
PRESET
THE PRESET MENU
In order to simplify the set up of the Etek3 a number of
Preset congurations are available for selection. Choosing
one of these presets will cause all of the necessary
parameters to be set in such a way as to make the Etek3
comply with the rules governing a particular paintball
league. It is also possible for the user to save up to two
Preset congurations of their own.
1,2,3
LOAD
THE LOAD PRESET PARAMETER
This parameter is used to load the required
preset conguration and has the following
choices:
> USER 1:
Load a set of custom ring mode
parameters that have been previously saved
by the user.
> USER 2:
Load a set of custom ring mode
parameters that have been previously saved
by the user.
> FACTORY:
Reset every parameter to the
factory set default. The Etek3 leaves the
factory set in this way.
> NPPL:
Load a set of parameters that congures the
Etek3 to comply with the 2008 NPPL rules governing ring
modes.
1
> PSP 10:
Load a set of parameters that congures the
Etek3 to comply with the PSP rules governing ring modes
in lower divisions (10bps).
1
> PSP 12:
Load a set of parameters that congures the
Etek3 to comply with the PSP rules governing ring modes
in higher divisions (12bps).
1
> MS10:
Load a set of parameters that congures the Etek3
to comply with the 2009 Millennium Series rules governing
ring modes.
1
> CANCEL:
Editing is cancelled and the parameter remains
unchanged.
44.
EMORTAL BOARD
44.
EMORTAL BOARD