Manual

USER INTERFACE
The Etek3 has a simple user interface through which all
aspects of it’s electronic control system can be monitored
and adjusted by means of the three buttons and graphical
LCD which comprise the Navigation Console.
SWITCHING ON
The Etek3 is be switched on by pushing and holding the
button. The LCD will display startup information including
model number and software version before displaying
the Run Screen if the button continues to be held down
during startup.
RUN SCREEN LAYOUT
The root of the user interface is the Run Screen. This screen
is the one most often displayed and provides the user with
essential feedback on the state of the Etek3. A typical Run
Screen is shown on the right.
On the left of the screen is a display option that is user
selectable from the Main Menu (see page 42).
This option can be:-
> A GAME TIMER
> A SHOT COUNTER
> AN ACTUAL RATE OF FIRE
INDICATOR
> A PEAK RATE OF FIRE
INDICATOR
Briey pressing the button will replace the display
option with the name of the currently selected Preset (see
page 44), or CUSTOM if a parameter of the selected preset
mode has been edited.
On the right of the screen are up to ve icons, each of
which provides graphical indication on dierent parts of
the Etek3 control electronics.
BREAK BEAM SENSOR SYSTEM
INDICATOR
USER SELECTABLE DISPLAY
OPTION
LOCK INDICATOR
BATTERY LEVEL INDICATOR
TRIGGER DETECTION
INDICATOR
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR ETEK3
ADVANCED SET-UP
EMORTAL BOARD
MAINTENANCE
UPGRADING
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
INDEX
33.
EMORTAL BOARD
EMORTAL BOARD
QUICK GUIDE