Manual

TSLOT MOUNTING
SYSTEM
The Etek3 utilises a T-slot arrangement to mount the OOPS
to the bottom of the frame. The T-slot is an improvement
over the dovetail mounting system found on most
paintball markers, and is much more able to withstand the
rigours of modern tournament paintball.
MACROLINE HOSING AND
ELBOWS
To aid the longevity of your macroline hosing, it is very
important to remove it from (and install it back into) the
ttings in the correct manner:
Pull back the collet section of the macroline tting and
keep the collet depressed.
Pull the macroline hose out of the macroline tting and
release the collet.
Before installing the macroline hose into the macroline
tting ensure that the end has been trimmed correctly to
ensure a tight t in the tting.
TSLOT
MOUNT
IF YOU EVER REMOVE THE MACROLINE HOSE FROM
THE FITTING, ALWAYS CHECK THE CONDITION OF
YOUR MACROLINE HOSING AND IF IT IS WORN OR THE
WRONG LENGTH REPLACE IT IMMEDIATELY.
WARNING
CONTENTS
ORIENTATION
QUICK SET-UP
USING YOUR ETEK3
ADVANCED SET-UP
EMORTAL BOARD
MAINTENANCE
UPGRADING
FAULT FINDING
SERVICE CENTERS
PARTS LIST
SPARES & ACCESSORIES
INDEX
21.
USING YOUR ETEK3
USING YOUR ETEK3
QUICK GUIDE