Manual

THE ETEK3 NAVIGATION
CONSOLE
The Etek3 utilises multi coloured LEDs to display all of
the information that the user requires via the Etek3s
Navigation Console.
Each area of the Navigation Console is used to perform
dierent functions and display dierent information as
outlined below:
The Select button is used to:
- Switch the Etek3 on and o.
- Switch the BBSS (eye system) on and o.
- To scroll through parameters and edit parameters.
The “E” on the Navigation Console is used to:
- Display the status of the BBSS (eye system).
- Display the value of a parameter in tens (10 - 90)
The “G” on the Navigation Console is used to:
- Display the value of a parameter in units (0 - 9)
- Display the status of the battery.
The “O” on the Navigation Console is used to:
- Display the value of a parameter in tenths (0.0 - 0.9)
As a combined unit the “E”, “G” and “O” are also used to:
- Display power up and power down status.
- Display tournament lock status.
- Display that factory settings have been restored
- To conrm whether a parameter value has been accepted
or rejected.
ETEK3 LT
ETEK3 AM
SELECT
BUTTON
18.
ORIENTATION