Manual

VISIT WWW.PLANETECLIPSE.COM

MAINTENANCE

Insert the front spring into the LPR cap, so that it rests neatly in the ad-

juster piston

(SEE FIGURE 5.22

Place the rear spring onto the LPR piston and insert piston and spring into

the LPR cap, o-ring end first (SEE FIGURE 5.23).

Before screwing the LPR cap back onto your Etek2, use a dry Q-tip to

clean the seal inside the LPR body (SEE FIGURE 5.24). Lubricate this seal

using a light 3 in 1 oil.

Replace the LPR cap by screwing it onto the LPR body in the Etek2 (SEE

FIGURE 5.25).

FIG 5.22

FIG 5.23

FIG 5.24

FIG 5.25