Manual

FIG-1
FIG-2
A
B
1
1
09
EMEK
FIG-1
The safety button
A
is located on the frame and is used to switch
between safe (PUSH SAFE) and re (PUSH FIRE).
PUSH FIRE
Push the safety button
A
in from the right side of the frame. The EMEK
will be live and ready to re.
FIG-2
When the EMEK is set to re, the safety button
B
will protrude from the
left side of the frame. If the button is pushed in from the left side side the
marker is NOT set to re.
Firing the EMEK
When set to PUSH FIRE the EMEK will re when the trigger is pulled.
1
IMPORTANT! If the safety button does not work contact your local
Eclipse Dealer immediately and do not use the marker.
QUICK START
THE EMEK SAFETY
BUTTON - PUSH FIRE
WARNING!
When PUSH FIRE is enabled the Emek is live and will re with every pull of the
trigger, if an air system is tted.
Ensure that the Emek is set to PUSH SAFE and a barrel blocking device is
attached until you are ready to use the marker.
WARNING