Manual

FIG-1
FIG-2
A
1
B
1
08
EMEK
FIG-1
The safety button
A
is located on the frame and is used to switch
between safe (PUSH SAFE) and re (PUSH FIRE).
PUSH SAFE
Push the safety button
A
in from the left side of the frame to make the
EMEK safe. The EMEK trigger will be locked and the marker will not re.
FIG-2
When the EMEK is safe, the safety button
B
will protrude from the right
side of the frame. If the button is pushed in from the right side of the
frame then the marker is NOT safe.
Firing the EMEK
When the safety button is set to PUSH SAFE the EMEK will not re.
1
IMPORTANT! If the safety button does not work contact your local
Eclipse Dealer immediately and do not use the marker.
QUICK START
THE EMEK SAFETY
BUTTON - PUSH SAFE
WARNING!
When the PUSH SAFE is enabled the Emek is still a live marker until the air
system has been fully removed.
Ensure that a barrel blocking device is attached when the marker is set to safe.
WARNING