Manual

15
EMEK
FIG-1
A
PUSH SAFE before you begin.
This ensures the marker will not re when the trigger is pulled.
B
Attach a barrel blocking device for safety.
C
Remove the preset air system.
Rotate the air system counter-clockwise from the ASA body.
D
Loosen the PAL clamping feed neck.
Open the feed neck lever away from the feed neck.
Rotate the feed neck lever screw counter-clockwise.
E
Remove the loader.
If the feed neck is too tight, loosen the clamping feed neck more.
F
Remove the Emek barrel.
Rotate the barrel counter-clockwise from the marker body.
1
IMPORTANT! To operate Safety Button see pages 8-9.
2
IMPORTANT! Extra precaution to avoid injury.
3
IMPORTANT! Always remove air system before unloading.
4
IMPORTANT! Always remove any paintballs from the breech of the
marker once the loader has been removed.
QUICK START
UNLOADING THE EMEK
WARNING!
Always make sure the marker is set to PUSH SAFE with a barrel blocking device
installed and that no paintballs are in the EMEK or loader before unloading.
Compressed air and nitrogen systems can be extremely dangerous if handled
or used incorrectly.
NEVER leave the EMEK gassed up when unloading.
NEVER point your marker in the direction of other people when not on the eld.
Remove any paintballs from the breech before storing your EMEK.
WARNING