Manual

A
FIG-1
B
11
EMEK
FIG-1
To assist with alignment, the dimple at the rear of the PAL loader
A
should sit in the alignment notch at the rear of the PAL feedtube
B
.
1
IMPORTANT! If the PAL loader is too tight or too loose simply
adjust the PAL clamping feedneck lever and/or feedneck screws to
compensate.
2
IMPORTANT! If the PAL loader is not correctly aligned this could
aect the eciency of the PAL loader system.
QUICK START
ATTACHING THE
PAL LOADER
1
2