Manual

FIG-1
B
A
10
EMEK
FIG-1
When attaching the PAL loader system to the PAL enabled EMEK,
ensure the plunger
A
is aligned correctly and sits under the plunger
receiver
B
. The PAL loader must be pushed fully into the feedtube.
1
IMPORTANT! If the PAL loader is too tight or too loose simply
adjust the PAL clamping feedneck lever and/or feedneck
screws to compensate.
2
IMPORTANT! If the PAL loader is not correctly aligned this
could aect the eciency of the PAL loader system.
QUICK START
ATTACHING THE
PAL LOADER
1
2