Manual

27
MG 100
QUICK START
UNLOADING THE MG 100
MAGFED
FIG-1
A
Push the safety button to SAFE before you begin unloading.
B
Attach a barrel blocking device.
C
Ensure the marker is de-gassed.
Push in and hold the POPS button and pull the POPS bonnet away
from the POPS body.
D
Remove the preset air system.
Rotate the air system counter-clockwise from the ASA body.
E
Depress and hold the magazine latch.
To release the magazine from the magazine well.
F
Remove the magazine.
Slide the magazine out from the magazine well.
G
Ensure the breech is empty.
H
Remove the barrel blocking device.
I
Remove the barrel.
Rotate the barrel counter-clockwise from the marker body.
1
ALWAYS always remove rounds from the breech before handling
the marker.
2
IMPORTANT! To enable SAFE/FIRE see pages 10-11.
3
IMPORTANT! Only remove air system when marker is de-gassed.
4
IMPORTANT! The magazine will not release if the magazine latch is
not depressed.
5
IMPORTANT! Keep barrel blocking device attached until safe.
WARNING!
Always make sure the MG 100 is in SAFE mode with a barrel blocking device
attached and that no paintballs are in the breech before unloading.
Compressed air and nitrogen systems can be extremely dangerous if handled
or used incorrectly.
NEVER leave the MG 100 gassed up when unloading.
NEVER point your marker in the direction of other people when not on the eld.
Remove any paintballs from the breech before storing your MG 100.
WARNING