Manual

FIG-5
FIG-6
FIG-8
FIG-7
FIG-5
Insert the PAL plunger
C
into the plunger receiver
D
.
FIG-6
Gently slide the PAL feedneck
E
over the plunger being careful not to
damage it until the feedneck sits at a slight forwards leaning angle. Then
push the feedneck down towards the back to level it out until it clicks
into place.
FIG-7
Rotate the PAL feedtube plug screw
A
clockwise to replace it using a
5/32 hex key.
FIG-8
Insert the dummy magazine
F
into the magazine well until it clicks
securely in place. Make sure the dummy magazine lock
G
is engaged,
which prevents the dummy magazine latch
H
from accidentally ejecting
the dummy magazine.
WARNING!
Take care when installing the PAL feedneck making sure not to apply too much
force around the PAL plunger.
ALWAYS ensure that the MG 100 is degased and free from projectiles before
beginning these procedures.
WARNING
G
A
H
C
5/32
E
F
D
!
13
MG 100
QUICK START
CHANGING BETWEEN
MAGFED AND HOPPER FED