Manual

FIG-1
FIG-2
A
B
11
MG 100
FIG-1
The safety button
A
is located on the frame and is used to switch
between safe (PUSH SAFE) and re (PUSH FIRE).
PUSH FIRE
Push the safety button
A
in from the right side of the frame to make the
MG 100 ready to re.
FIG-2
The button will click rmly into position
B
and will sit ush with the
frame. The trigger will be unlocked and the marker will re.
1
IMPORTANT! If the safety button does not work contact your local
Eclipse Dealer immediately and do not use the marker.
QUICK START
THE MG 100 SAFETY BUTTON
FIRE
WARNING!
When FIRE is enabled the MG 100 is live and will re with every pull of the trigger,
if an air system is tted.
Ensure that the MG 100 is set to SAFE and a barrel blocking device is attached
until you are ready to use the marker.
WARNING