Manual

FIG-1
FIG-2
D
B
A
C
09
EMEK
FIG-1
The safety switch
A
is located on the left side of the Emek frame and is
used to switch between SAFE (S) and FIRE (F).
Enabling FIRE (F):
Rotate the safety switch
A
clockwise until the F indicator
B
is revealed
and the switch arrow points towards F. The trigger is now unlocked.
FIG-2
FIRE (F) is also represented on the right side of the frame by the switch
arrow
C
pointing towards the F indicator
D
Firing the EMEK
When the safety switch points towards F the marker is live (if tted with
an air system) and the trigger is unlocked. The marker will now re when
the trigger is pulled.
QUICK START
THE EMEK SAFETY
SWITCH - FIRE (F)
WARNING!
When FIRE (F) is enabled the Emek is live and will re with every pull of the
trigger, if an air system is tted.
Ensure that the Emek is set to SAFE (S) and a barrel blocking device is attached
until you are ready to use the marker.
WARNING