Manual

13
EMEK
FIG-1
A
Turn the safety switch to SAFE (S) before you begin.
B
Attach a barrel blocking device for safety.
C
Remove the preset air system.
Rotate the air system counter-clockwise from the ASA body.
D
Loosen the clamping feed neck.
Open the feed neck lever away from the feed neck.
Rotate the feed neck lever screw counter-clockwise.
E
Remove the loader.
If the feed neck is too tight, loosen the clamping feed neck more.
F
Remove the Emek barrel.
Rotate the barrel counter-clockwise from the marker body.
1
IMPORTANT! To enable SAFE/FIRE see page 8.
2
IMPORTANT! Extra precaution to avoid injury.
3
IMPORTANT! Always remove air system before unloading.
4
IMPORTANT! Always remove any paintballs from the breech of the
marker once the loader has been removed.
QUICK START
UNLOADING THE EMEK
WARNING!
Always make sure SAFE mode is enabled with a barrel blocking device installed
and that no paintballs are in the breech or loader before unloading.
Compressed air and nitrogen systems can be extremely dangerous if handled
or used incorrectly.
NEVER leave the EMEK gassed up when unloading.
NEVER point your marker in the direction of other people when not on the eld.
Remove any paintballs from the breech before storing your EMEK.
WARNING