User Manual

C
D
A
E
B
1
The bore sizes in your SL Shaft3 Barrel Kit may vary
according to the model of SLS you have.
2
The SLS marker will only accept COCKER threaded
barrels. Do not use any other type of barrel thread.
The Eclipse SLS marker comes as standard with an
Eclipse SL Shaft 3 Barrel Kit.
1
The barrel screws into the body of the SLS using a right
hand thread meaning that if you hold the SLS pointing
away from you the barrel screws into the body in a
counter-clockwise direction.
2
The barrel comprises of two parts, a Barrel Back A and a
Barrel Front B .
The two parts are joined together with a left hand
thread meaning that if you hold the barrel, with the
back nearest you, the front unscrews in a counter-
clockwise direction. The bore size of the barrel back is
engraved at the end of the Barrel Back C .
On the Barrel Back there is a 016 NBR 70 o-ring D which
prevents the barrel from vibrating loose from the SLS
body when the marker is red. There is a 015 NBR 70
o-ring on the Barrel Front E helps with alignment when
the two sections are screwed together.
Replace and lubricate these o-rings with Eclipse Grease
as necessary.
SL SHAFT3 BARREL KIT
FEATURE SUPPLEMENT
4