User Manual

WARNING: IF YOU ARE AT ALL UNSURE OF

PERFORMING THIS MAINTENANCE PROCEDURE

PLEASE CONTACT YOUR NEAREST SERVICE CENTRE. SEE THE

SERVICE CENTRE CHAPTER OF YOUR EGO10 OPERATORS

MANUAL

Fig 2.12

Fig 2.14

Fig 2.13

With the top section of the Inline Regulator upside

down, screw the top and bottom sections together (See

Figure 2.13)

Re-attach the Inline Regulator to the SLS FRM (See

Figure 2.14)

, then re-connect the macroline hose to the

tting on the regulator swivel.

Basic cleaning of the SL3 Inline Regulator is complete.

(CONTINUED)

FEATURE SUPPLEMENT