Manual

Use OPTO sensor to detect trigger operation.
Use micro-switch to detect trigger operation.
Cancel trigger detection method selection.
Select standard solenoid power level.
Select high power level for solenoid.
Cancel solenoid power level selection.
Turn off audible indicator.
Turn on audible indicator.
Cancel audible indicator selection.
Turn off audible tone when any button is pressed (SOUND dependant).
Turn on audible tone when any button is pressed (SOUND dependant).
Cancel audible tone selection.
Time in seconds that the backlight comes on for (00:00 = no backlight). (Default 00:06)
Percentage of red light in backlight (BACKLIGHT dependant).
Percentage of green light in backlight (BACKLIGHT dependant).
Percentage of blue light in backlight (BACKLIGHT dependant).
LCD contrast level. (Default 14)
AUX socket output off.
AUX socket output on.
Cancel AUX socket selection.
Time in minutes after which the Ego LV1 automatically powers off. (Default 20:00)
Double click is disabled entirely.
Double click for power up only.
Double click is fully enabled.
Cancel the double click selection.
Return to Main Menu.
Training mode disabled.
Training mode enabled.
Cancel training mode selection.
OPTO (Default)
SWITCH
CANCEL
LO PWR (Default)
HI PWR
CANCEL
OFF
ON (Default)
CANCEL
OFF
ON (Default)
CANCEL
00:00 - 00:20
0 - 100%
0 - 100%
0 - 100%
0 - 30
OFF
ON (Default)
CANCEL
05:00 - 60:00
NONE
POWER UP
ALL (Default)
CANCEL
OFF (Default)
ON
CANCEL
HARDWARE
TRIGGER
SOLENOID
SOUND
TONES*
BACKLIGHT
RED LEVEL*
GRN LEVEL*
BLU LEVEL*
CONTRAST
AUX OUT
DBL CLICK
AUTO OFF
BACK
TRAINING
(CONTiNUED)
MENU TREE 83