Manual

REGULATOR BODY
REGULATOR BOTTOM
REGULATOR SWIVEL
LPR CAP
LPR CAP O-RING (013 NBR70)
ADJUSTER SCREW
ADJUSTER SCREW O-RING (007 NBR70)
LPR BODY
LPR SEAL
LPR BODY EXTERNAL O-RING (013 NBR70)
LPR BODY INTERNAL O-RING (008 NBR 70)
LPR SPRING
LPR PISTON
LPR PISTON O-RING (013 NBR70)
PURGE POPPET ASSEMBLY
4
ADJUSTER BOTTOM
ADJUSTER O-RING (011 NBR70)
REGULATOR SEAL
ADJUSTER EXTERNAL O-RING (011 NBR70)
INTERNAL ADJUSTER O-RING (008 NBR70)
ADJUSTER TOP
REGULATOR PISTON
PISTON O-RING (14X2 NBR70)
REGULATOR SPRING
3
SWIVEL O-RINGS (015 NBR70)
LOW PRESSURE REGULATOR
5
1
The SL4 inline regulator should be reset to
factory after re-assembly.
2
Only use the SL4 inline regulator with the
Ego LV1.
3
Only use the SL4 Ego spring with the Ego LV1
SL4 inline regulator.
4
If the Purge Poppet assembly is removed for
maintenance ensure is it re-installed correctly,
failure to do so may seriously damage the Ego
LV1 solenoid valve.
5
The low pressure regulator should be reset to factory after
re-assembly.
SL4 iNLiNE REGULATOR
1,2
TECHNiCAL RESOURCES 73