Manual

This parameter is used to set the Game Time, the time from which the game timer counts down to zero. This
parameter can be set between 00:00 and 60:00 minutes in 10 second increments. The factory default is 07:10 (7
minutes 10 seconds).
When the game timer reaches 00:00, GAME OVER will be displayed and the audible alarm will sound continually,
provided that the SOUND parameter is set to ‘ON’.
An alarm condition is generated whenever the Game Timer counts down to the time set by the ALARM parameter.
This parameter can be set between 00:00 and 10:00 minutes in 10 second increments.
When the alarm condition is generated the Game Timer will start to flash and the audible alarm will sound every
second, provided that the SOUND parameter is set to ‘ON’.
This parameter is used to select the event which will cause the Game Timer to begin counting down. This parameter
has the following choices:
> BUTTON: Pressing the button will start the Game Timer.
> TRIGGER: Pulling the trigger will start the Game Timer.
> CANCEL: Cancel editing and leave the parameter unchanged.
This menu is comprised of parameters that control the operation of the Game Timer.
GAME PARAMETER
ALARM PARAMETER
START PARAMETER
GAME TiMER MENU
ADVANCED SETUP 41