Manual

The parameter sets the number of shots in semi-automatic that are required at the KICK IN rate before ramping will
start. The parameter can be set between 3 and 9 pulls in 1 pull increments.
This parameter sets the minimum rate at which the user has to pull the trigger in order to start ramping. This
parameter can be set between 3.3 and 10.0 pulls per second in 0.1 pulls per second increments.
Once the Ego LV1 is ramping the user has to continue to pull the trigger at a minimum rate in order to maintain
the ramping. This parameter sets this rate and can be between 3.3 and 10.0 pulls per second in 0.1 pulls per
second increments.
The RESTART parameter defines the amount of time after the last trigger pull during which the ramp can be
restarted with a single trigger pull. If a trigger pull occurs after the RESTART time has expired, then the other ramp
start conditions have to be met before ramping will restart. This parameter can be set between 0.0 and 1.0 seconds
in 0.1 second increments.
SEMi SHOTS PARAMETER
KiCK iN PARAMETER
SUSTAiN PARAMETER
RESTART PARAMETER
32 ADVANCED SETUP