Manual

C
D
A
E
B
1
The bore sizes in your SL3 Shaft Barrel Kit may vary
according to the model of CSL you have.
2
The CSL marker will only accept COCKER threaded
barrels. Do not use any other type of barrel thread.
The Eclipse CSL marker comes as standard
with an Eclipse SL3 Shaft Barrel Kit.
1
The barrel screws into the body of the CSL
using a right hand thread meaning that if
you hold the CSL pointing away from you
the barrel screws into the body in a counter-
clockwise direction.
2
The barrel comprises of two parts, an
Aluminium Barrel Back A and a Carbon Fibre
Barrel Front B.
The two parts are joined together with a left
hand thread meaning that if you hold the
barrel, with the back nearest you, the front
unscrews in a counter-clockwise direction.
The bore size of the barrel back is engraved at
the end of the Barrel Back C.
On the Barrel Back there are two o-rings.
A 016 NBR 70 o-ring at the back (D) which
prevents the barrel from vibrating loose from
the CSL body when the marker is fired and a
015 NBR 70 o-ring at the front (E) helps with
alignment when the two sections are screwed
together.
Replace and lubricate these o-rings with
Eclipse Grease as necessary.
SL3 ShaFt BarreL Kit
FEATURE SUPPLEMENT
4