User's Manual

(CONTINUED)

When the Valve Guide is in the correct place, you will

be able to see the closed side through the Valve Plug

hole in the Ego11 Body

(SEE FIGURE 24K).

Using a 1/8” hex key replace the FRM Screw that

secures the LPR Body into the marker body

(SEE

FIGURE 24L)

. Ensure that the LPR Body is in the

correct orientation before attempting to replace the

FRM Screw. The larger of the two holes on the LPR

Body should be at the bottom when aligning the holes

with the Ego11 Body.

Make sure that the Valve Guide is lined up correctly

and then take a 1/8” hex key and replace the Valve

Plug

(SEE FIGURE 24M).

You have now successfully stripped and cleaned your

Ego11 Valve Assembly. See page 59 on how to attach

the Ego11 Frame.

IF YOU ARE AT ALL UNSURE OF PERFORMING A

MAINTENANCE PROCEDURE PLEASE CONTACT

YOUR NEAREST SERVICE CENTRE.

FIG 24K

FIG 24M

FIG 24L

ORIENTATION

USING THE EGO11

ADVANCED SET-UP

MENU TREE

MAINTENANCE

FAULT FINDING

SERVICE CENTRES

PARTS LIST

SPARES & ACCESSORIES

ECLIPSE E-PORTAL

INDEX

QUICK SET-UP

CONTENTS

67.

MAINTENANCE

QUICK GUIDE