User's Manual

(CONTINUED)

Note how one side of the Valve Guide is flat (A) whilst

the other is raised (B) to create the surface that the

Exhaust Valve seals on

(SEE FIGURE 24F). Inspect the

sealing face of both the Valve Guide and the Exhaust

Valve for any excessive wear or damage. If either the

Exhaust Valve or the Valve Guide are damaged then

replace with authentic Ego11 parts.

Lubricate both of the o-rings on the Valve Guide with

Eclipse Oil

(SEE FIGURE 24G). Lubricate the o-rings on

the LPR Body with Eclipse Oil

(SEE FIGURE 24H).

Place the Exhaust Valve in the Valve Guide, making

sure that the sealing faces are next to each other, and

place the Valve Spring over the end of the Exhaust

Valve and then place this sub-assembly over the LPR

Body

(SEE FIGURE 24I). Make sure the larger diameter

FRM Screw hole (A) in the LPR Body, and the blocked

side of the Valve Guide (B) are in line with each other

before inserting the sub-assembly into the Ego11.

Holding the LPR Assembly so that the larger hole

on the LPR Body is facing the bottom of the marker

body, insert the Valve Assembly, Valve Spring and

LPR Assembly into the front of the marker body

(SEE

FIGURE 24J)

FIG 24F

FIG 24G

FIG 24H

FIG 24JFIG 24I

66.

MAINTENANCE