User's Manual

(CONTINUED)

nsert the Front Spring (silver in colour) into the LPR

Cap, so that it rests neatly on the Adjuster Screw

SEE

FIGURE 18E

Place the gold coloured Rear Spring onto the LPR

Piston and insert the Piston and Spring into the LPR

Cap, o-ring end first

SEE FIGURE 18F.

Before screwing the LPR Cap back onto your Ego11,

use a dry cotton bud to clean the 010 NBR70 o-ring

inside the LPR Body

SEE FIGURE 18G. Lubricate this

seal using a light gun oil, such as Eclipse Oil.

Replace the LPR Cap by screwing it onto the LPR Body

in the Ego11

SEE FIGURE 18H.

IF YOU ARE AT ALL UNSURE OF PERFORMING A

MAINTENANCE PROCEDURE PLEASE CONTACT

YOUR NEAREST SERVICE CENTRE.

FIG 18E

FIG 18F

FIG 18G

FIG 18H

ORIENTATION

USING THE EGO11

ADVANCED SET-UP

MENU TREE

MAINTENANCE

FAULT FINDING

SERVICE CENTRES

PARTS LIST

SPARES & ACCESSORIES

ECLIPSE E-PORTAL

INDEX

QUICK SET-UP

CONTENTS

55.

MAINTENANCE

QUICK GUIDE