User's Manual

THE CURE3+ BOLT

Raise the Bolt Pin and remove the Bolt Assembly from

the Ego11 marker body

FIGURE 17A.

Using a dry cotton bud remove any paint or grease

from the surface of the Bolt

SEE FIGURE 17B.

Lubricate the Detent slots on either side of the Bolt

with gun oil, ensuring that a drop of oil is placed on

the o-rings at the point where they cross the Detent

slots

SEE FIGURE 17C.

Replace the Bolt Assembly, locking the Bolt Pin into

the designated slot in the Rammer using the dot on

the Bolt as a reference guide

SEE FIGURE 17D.

Incorrect location of the Bolt can seriously damage

the Body of your Ego11.

We recommend the use of Eclipse Oil on the Ego11 Rammer and

Bolt.

DE-GAS YOUR MARKER, DISCHARGING ANY

STORED GAS IN A SAFE DIRECTION, AND REMOVE

THE BARREL, LOADER, AIR SYSTEM AND ANY

PAINTBALLS TO MAKE THE MARKER EASIER AND

SAFER TO WORK ON.

FIG 17A

FIG 17B

FIG 17C

FIG 17D

DOT

ORIENTATION

USING THE EGO11

ADVANCED SET-UP

MENU TREE

MAINTENANCE

FAULT FINDING

SERVICE CENTRES

PARTS LIST

SPARES & ACCESSORIES

ECLIPSE E-PORTAL

INDEX

QUICK SET-UP

CONTENTS

53.

MAINTENANCE

QUICK GUIDE