User's Manual

GRN LEVEL
THE LCD BACKLIGHT GREEN LEVEL
PARAMETER
The percentage of green light emitted
from the LCD backlight.
BLU LEVEL
THE LCD BACKLIGHT BLUE LEVEL
PARAMETER
The percentage of blue light emitted
from the LCD backlight.
AUX OUT
THE AUX OUT PARAMETER
This parameter turns on and off the AUX
socket on the PCB. The choices available
for this parameter are:
>OFF: AUX socket switched off.
>ON: AUX socket switched on.
>CANCEL: Cancel editing and leave the
parameter unchanged.
DBL CLICK
THE DOUBLE CLICKING PARAMETER
This parameter is used to select where
double-clicking the button can be
used. The choices available for this
parameter are:
>NONE: Double clicking is disabled
entirely. To power up the Ego11 and
enter the Main Menu the user needs to
push and hold the button.
>POWER UP: Double clicking only works when
powering up the Ego11. To enter the Main Menu the
user still needs to push and hold the button.
>ALL: Double clicking works when powering up the
Ego11 and entering the Main Menu. Push and hold still
works for these procedures as well.
>CANCEL: Cancel editing and leave the
parameter unchanged.
AUTO OFF
THE AUTO POWER OFF TIME PARAMETER
The time that has to elapse before the
Ego11 switches itself off if not used.
The parameter can be set between 5 and
60 minutes.
ORIENTATION
USING THE EGO11
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTRES
PARTS LIST
SPARES & ACCESSORIES
ECLIPSE E-PORTAL
INDEX
QUICK SET-UP
CONTENTS
45.
ADVANCED SET-UP
ADVANCED SET-UP
QUICK GUIDE