User's Manual

6 QUICK SET-UP
Details on how to get up and running quickly with your
Ego11. This section is essential reading for everyone.
6 > SWITCHING ON THE EGO11
> SWITCHING OFF THE EGO11
> FIRING THE EGO11
> THE EGO11 CIRCUIT BOARD
7 > USING THE BREAK BEAM SENSOR SYSTEM
8 > FACTORY SET-UP GUIDE
9 > INSTALLING A 9V BATTERY
10 ORIENTATION
Names the component parts of the Ego11 Marker.
This section is essential reading for everyone.
10 > THE ECLIPSE EGO11
11 > ECLIPSE SHAFT4 BARREL
12 > SL3 INLINE REGULATOR
> LOW PRESSURE REGULATOR
13 > CURE3+ BOLT ASSEMBLY
> ZICK2 RAMMER ASSEMBLY
14 > EGO11 SOLENOID ASSEMBLY
15 > 2011 PUSH OPERATED PURGE SYSTEM ASSEMBLY
16 > THE EGO11 NAVIGATION CONSOLE
17 > OPERATIONAL OVERVIEW
18 USING YOUR EGO11
Detailed information on how to use and interact with
the Ego11 via its user interface.
18 > SETTING UP YOUR EGO11
> INSTALLING A PRESET AIR SYSTEM
19 > T-SLOT MOUNTING SYSTEM
> STRAIGHT HOSE FITTINGS
> MACROLINE HOSING
20 > ATTACHING A LOADER
21 > SETTING THE TRIGGER
23 > ADJUSTING THE VELOCITY
> ADJUSTING THE LPR PRESSURE
24 > SOLENOID FLOW RESTRICTORS
25 > USER INTERFACE
> RUN SCREEN LAYOUT
26 > THE BBSS INDICATOR
> THE AUX OUT INDICATOR
27 > THE SOUND INDICATOR
> THE TRIGGER DETECTION INDICATOR
28 > THE LOCK INDICATOR
> THE BATTERY LEVEL INDICATOR
> THE GAME TIMER
> THE SHOT COUNTER
29 > THE ACTUAL RATE OF FIRE
> THE PEAK RATE OF FIRE
> THE MENU SYSTEM
30 MENU TREE
A quick reference guide to the user interface.
34 ADVANCED SET-UP
In depth information on setting up the Ego11.
34 > ACCESSING THE MENU SYSTEM
> MOVING AROUND THE MENUS
> ALTERING PARAMETERS
35 > THE MAIN MENU
36 > PRESET
-The Preset Menu
> LOAD -The Load Preset Parameter
> SAVE -The Save Preset Parameter
37 > FIRE MODE -The Fire Mode Parameter
> ROF CAP -The Rate of Fire Cap Parameter
38 > BS ON ROF -The Maximum Rate of Fire Parameter
>
BS OFF ROF - Rate of Fire With BBSS Off Parameter
39 > RAMP SETUP -The Ramp Set-up Menu
> TYPE -The Ramp Type Parameter
> RATE -The Linear Ramp Rate Parameter
> SEMI SHOTS -The Ramp Start Parameter
> KICK IN -The Ramp Kick-In Parameter
40
> SUSTAIN -The Sustain Rate Parameter
> RESTART -The Ramp Restart Parameter
> TIMING -The Timing Menu
> DWELL -The Dwell parameter
4.
CONTENTS