User's Manual

BS ON ROF
THE MAXIMUM RATE OF FIRE PARAMETER
The BS ON ROF parameter is used to
set the maximum achievable rate of
fire from the Ego11. The value of this
parameter can be adjusted between 4.0
and 30.0 balls per second in 0.1bps
increments.
1
The BS ON ROF parameter will only be
displayed if you have set the ROF CAP
parameter to ‘ON’.
BS OFF ROF
THE RATE OF FIRE WHEN BBSS IS OFF
PARAMETER
The BS OFF ROF parameter is used
to control how fast the Ego11 cycles
when the Break Beam Sensor System
is disabled. This parameter can be set
between 4.0 and 15.0 balls per second
and should always be set to the slowest
speed of the loading system in use.
1
1
Always calibrate your Ego11 ROF CAP parameters to the local field
BPS meter as readings may vary from meter to meter.
38.
ADVANCED SET-UP