User's Manual

FIRE MODE
THE FIRING MODE PARAMETER
This parameter is used to select the
firing mode of the Ego11 and has the
following choices:
> SEMI: This is the default and in this
firing mode the Ego11 will fire one shot
for every trigger pull.
> RAMP: In this firing mode, the rate of
fire is increased above the rate at which the trigger
is pulled once certain criteria have been met. These
criteria are set by the parameters on the RAMP SETUP
menu.
1
> CANCEL: Editing is cancelled and the parameter is
unchanged.
ROF CAP
THE RATE OF FIRE CAP PARAMETER
The ROF CAP parameter is used to
specify whether or not the Ego11 should
have a limited, or capped rate of fire.
When the ROF CAP is enabled, the
maximum achievable rate of fire is set
by the BS ON ROF parameter. Choices for
the ROF CAP parameter are:
> OFF: Rate of fire only limited by the
loader.
> ON: Rate of fire limited to the BS ON ROF parameter
value.
> CANCEL: Cancel editing and leave the parameter
unchanged.
1
Some presets and fire modes may only be available in certain
countries and on some models of the Ego11.
ORIENTATION
USING THE EGO11
ADVANCED SET-UP
MENU TREE
MAINTENANCE
FAULT FINDING
SERVICE CENTRES
PARTS LIST
SPARES & ACCESSORIES
ECLIPSE E-PORTAL
INDEX
QUICK SET-UP
CONTENTS
37.
ADVANCED SET-UP
ADVANCED SET-UP
QUICK GUIDE